📌 이 취약점에 대해 확인된 사실
전부 발행처가 발표한 값입니다. 우리가 계산하거나 판단한 숫자는 하나도 없습니다.
악용 여부
심각도 (발행처 발표값)
높음7.5
CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
악용 확률 (EPSS)
0.2%
📄 원문 그대로
아래 문장은 전부 발행처가 쓴 것입니다. 번역하지 않습니다 — 보안 문서의 오역은 조치를 바꿉니다.
취약점 설명 (NVD)
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit.
참고
악용 확률 변화
우리가 매일 저장한 EPSS 스냅샷입니다. 원본은 전날 값만 주므로, 이 표는 수집을 시작한 이후만 보여줍니다.
| 기준일 | 확률 | 백분위 |
|---|---|---|
| 2026-10-28 | 0.17% | 6.4% |
| 2026-10-27 | 0.17% | 6.4% |
| 2026-10-26 | 0.17% | 6.4% |
| 2026-10-25 | 0.17% | 6.4% |
| 2026-10-24 | 0.27% | 18.4% |
🧩 같은 약점 유형 — CWE-1392
같은 분류의 다른 취약점입니다. 같은 실수가 제품을 가리지 않고 반복됩니다.